ML系列半自动台式灭菌器

灭菌应用程序 Sterilization Applications

• 例如营养基和缓冲溶液的液体Liquids such as nutrient media and buffer solutions
• 例如吸管、试管和过滤器的固体物品Solid items such as pipettes, tubes and filters
• 玻璃、塑料制品 Glassware and plastic articles

安全配置 Safety Features

实验室灭菌器设计了多重的、相互独立的机械式和数字化的安全锁定装置。The autoclave lids are designed with a number of independent mechanical and digital safety features.

• A safety device prevents the operator from opening the door when the chamber is pressurized一个重要安全装置防止腔门在腔内有压力的时候被打开
• A cycle cannot start if the door is open or not properly locked腔门开启或者门锁没有完全锁闭的情况下，灭菌程序不能启动。
• The door cannot unlock until chamber pressure reaches room pressure灭菌腔内压力不等于工作环境的压力时，门锁不能解锁。
• Safety Valves: The chamber is equipped with safety valves – if the pressure exceeds the allowed limit the safety valves will discharge灭菌腔内压力不等于工作环境的压力时，门锁不能解锁。

质量配置 Quality Features

• The chamber is constructed of long lasting 316Ti grade stainless steel with superior corrosion resistance 腔体采用316钛钢合金制作，具有优越的抗腐蚀性。
• The autoclave is designed for easy servicing allowing maintenance access to all components 该灭菌器使用方便，所有部件都便于维修。
• Drain Protection: The exhaust drain is mixed with cold tap water that cools the exhaust’s temperature before reaching the drain. 排水保护：排汽装置被冷水冷却到适宜温度时，排水才能开始。

灭菌器指令和达标合格Sterilizer Directives and Standards Compliance

腾氏高质量灭菌器完全遵照以下最严苛的国际法规和产品标准进行设计和制造。Tuttnauer’s high quality laboratory autoclaves comply with the strictest international directives and standards.

• Pressure Equipment: PED 97/23 EEC, EN 10028-7, EN 13445, ASME Code Sec VIII 
• Safety: IEC/UL/EN61010-1, IEC 61010-2-040, EN 61326
• Sterilization: DIN 58951 Series, ISO 17665-1:2006
• Quality System: ISO 9001:2000, ISO 13485:2003

型号表 Model Chart