服务热线:400-028-9008
您好!欢迎访问图拉扬公司![登录] [注册]
我的订单

当前位置:首页 > 实验技术 > 前处理 > 利用离心分配色谱法从大麻提取物中分离四氢大麻酚
文章导读
本研究开发了一种从大麻提取物中分离四氢大麻酚的方法,以获得符合大规模生产监管和商业规格的无四氢大麻酚产品

Tetrahydrocannabinol separation from cannabis extracts using centrifugal partition chromatography

Ada C. Gallo-Molina et al.

 

Highlights
•This publication reveals a preparative-scale methodology to produce THC-free extract.
•The ternary phase diagram was used to simplify the selection of the solvent system.
•Cannabis extracts and distillates was processed by CPC to achieve a THC separation.
•A product rich in CBD and with minimal THC content was successfully obtained from a cannabis extract.

亮点

• 本研究揭示了一种可制备规模的、用于生产不含四氢大麻酚提取物的方法。
• 利用三元相图简化了溶剂体系的选择过程。
• 采用离心分配色谱技术处理大麻提取物和蒸馏物,以实现四氢大麻酚的分离。
• 成功从大麻提取物中获得了富含大麻二酚且四氢大麻酚含量极低的产品。



Abstract
In this study, a method was developed for the separation of tetrahydrocannabinol (THC) from a Cannabis extract to obtain a THC-free product that meets regulatory and commercial specifications for large-scale production. Considering Colombia’s regulations and pharmaceutical restrictions on certain solvents, heptane, ethanol, and water were selected for this study. Process simulation software (ASPEN Plus V14) was used to generate a ternary phase diagram and identify suitable solvent systems for the separation of THC from cannabis extract. In this diagram, the biphasic (liquid–liquid) region was determined, and within it, the low-polarity zone (characterized by low water content) was delineated. Four heptane/ethanol/water (HEtWat) solvent systems were preselected: I: 4.6/3.5/1, II: 7.2/5.6/1, III: 16.2/10.4/1, and IV: 4/4/1 (v/v/v). These systems were evaluated based on the THC partition coefficient (KTHC). Two solvent systems were selected for laboratory-scale tests using a Gilson CPC 250 unit. Among them, the heptane/ethanol/water system 4.6/3.5/1 (v/v/v) was chosen for method development at industrial scale using a Rothacrom rCPC system.

摘要
本研究开发了一种从大麻提取物中分离四氢大麻酚的方法,以获得符合大规模生产监管和商业规格的无四氢大麻酚产品。考虑到哥伦比亚的法规以及对某些溶剂的药用限制,本研究选择了庚烷、乙醇和水。使用流程模拟软件(ASPEN Plus V14)生成三元相图,并确定适用于从大麻提取物中分离四氢大麻酚的溶剂体系。在该相图中,确定了双相(液-液)区域,并在其中划分出了低极性区(以低水含量为特征)。预选了四个庚烷/乙醇/水溶剂体系:体系 I:4.6/3.5/1,体系 II:7.2/5.6/1,体系 III:16.2/10.4/1,以及体系 IV:4/4/1(体积比)。基于四氢大麻酚的分配系数对这些体系进行了评估。选择其中两个溶剂体系,使用 Gilson CPC 250 型设备进行实验室规模测试。其中,庚烷/乙醇/水(4.6/3.5/1,体积比)体系被选中用于使用 Rothacrom rCPC 系统进行工业规模的方法开发。


Additionally, two laboratory-scale tests demonstrated the method’s viability to: (1) separate THC from mother liquor (a byproduct resulting from the crystallization of cannabidiol (CBD)) yielding a THC-free product enriched in minor cannabinoids (a key feature of mother liquor); and (2) purify THC from a refined extract (distillate) enriched in this cannabinoid. several tests was performed to determine the maximum mass of full-spectrum (FS) Cannabis extract that could be processed, achieving sufficient THC separation to comply with regulatory limits (THC < 0.05 %). The process yielded 613 g of THC-free extract, referred to as broad spectrum (BS), containing 85 % CBD and 0.02 % THC, from 800 g of FS in 9.5 h, resulting in an operational efficiency of 77 % (613 g BS / 800 g FS). A total of 97.06 % of cannabichromene (CBC) was recovered in the residual fraction, indicating strong retention of this cannabinoid by the stationary phase. Fractions 9 and 10 contained 85.3 % (w/w) THC. These THC- and CBC-rich fractions are proposed for further isolation and potential applications in medical research.

此外,两项实验室规模测试证明了该方法在以下方面的可行性:(1)从母液(大麻二酚结晶过程中产生的副产品)中分离四氢大麻酚,得到不含四氢大麻酚且富含次要大麻素的产品(这是母液的一个关键特征);(2)从富含四氢大麻酚的精制提取物(蒸馏物)中纯化四氢大麻酚。进行了多项测试以确定可加工的全谱大麻提取物的最大量,实现了足够的四氢大麻酚分离,从而符合监管限值(四氢大麻酚 < 0.05%)。该工艺在 9.5 小时内从 800 克全谱大麻提取物中生产出 613 克不含四氢大麻酚的提取物(称为广谱提取物),其中含有 85% 的大麻二酚和 0.02% 的四氢大麻酚,操作效率为 77%(613 克广谱提取物 / 800 克全谱提取物)。残余馏分中回收了 97.06% 的大麻色烯,表明该大麻素被固定相强烈保留。馏分 9 和 10 含有 85.3%(重量比)的四氢大麻酚。这些富含四氢大麻酚和大麻色烯的馏分被提议用于进一步的分离和在医学研究中的潜在应用。

 

*本文内容非商业广告,仅供专业人士参考!