服务热线:400-028-9008
您好!欢迎访问图拉扬公司![登录] [注册]
我的订单

当前位置:首页 > 文献方案 > 解决方案 > 超临界CO₂共萃取黑孜然和葡萄籽:油得率、组成及氧化行为
文章导读
本研究采用超临界CO₂(SC-CO₂)联合共萃取黑孜然和葡萄籽,获得功能性油(FO),并评估其氧化稳定性。在种子质量比为1:1时,SC-CO₂共萃取得到的FO得率为28.0±0.5%,超过两种样品单独萃取的预期得率(p<0.001)
Supercritical CO2 co-extraction of black cumin and grape seeds: oil yield, composition, and oxidative behavior
Rustam Tokpayev et al.

Highlights
•Co-extraction yielded 24.8% more oil than expected from separate extraction.
•GC-MS revealed linoleic acid degradation into hydroxy, dicarboxylic, epoxy acids.
•Oxidative stability (AV, SV, PV, AnV) correlated with changes in VO composition.

•The derivatives of linoleic acid in FO undergo oxidation at a higher rate than those in GSO and BCO.

研究亮点
• 共萃取的油得率比单独萃取预期值高24.8%。
• GC-MS揭示亚油酸降解为羟基酸、二羧酸和环氧酸。
• 氧化稳定性(AV、SV、PV、AnV)与VO组成变化相关。
• FO中的亚油酸衍生物氧化速率高于GSO和BCO中的相应衍生物。


Abstract

In this study, we utilized combined supercritical CO2 (SC‑CO2) co‑extraction of black cumin and grape seeds to obtain a functional oil (FO) for evaluating its oxidative stability. At 1:1 seed mass ratio, SC‑CO2 co-extraction produced FO yield of 28.0±0.5%, exceeding the expected yield from separate extraction of two samples (p<0.001). Under accelerated thermo-oxidation (70°C, air flow 10 L/h), FO demonstrated higher oxidative stability than grape seed oil (GSO) and black cumin oil (BCO), as evidenced by the lowest maximum peroxide value (20±0.43 for FO, 32±2.1–GSO and 26±0.38–BCO) and anisidine value (235±7.96 for FO, 269±12.7–GSO and 291±12.5–BCO). GC-MS monitoring of over 40 compounds revealed formation dynamics of secondary degradation products, including hydroxy, dicarboxylic, and epoxy acids. The decline in the relative GC-MS peak area of ethyl linoleate was described by a first-order model (R2=0.979–0.996), yielding apparent rate constants for the three oils. Although apparent rate constants for FO and BCO (2.9 × 10-1 day-1) were roughly twice that for GSO (1.46 × 10-1 day-1), the onset of active degradation in FO was delayed by 4 days, and the overall accumulation of secondary products remained lowest. These findings compare the yield and oxidative behavior of co-extracted FO with individual oils.

摘要
本研究采用超临界CO₂(SC-CO₂)联合共萃取黑孜然和葡萄籽,获得功能性油(FO),并评估其氧化稳定性。在种子质量比为1:1时,SC-CO₂共萃取得到的FO得率为28.0±0.5%,超过两种样品单独萃取的预期得率(p<0.001)。在加速热氧化条件下(70°C,空气流量10 L/h),FO表现出比葡萄籽油(GSO)和黑孜然油(BCO)更高的氧化稳定性,表现为最低的最大过氧化值(FO为20±0.43,GSO为32±2.1,BCO为26±0.38)和茴香胺值(FO为235±7.96,GSO为269±12.7,BCO为291±12.5)。GC-MS监测40多种化合物,揭示了二次降解产物的形成动态,包括羟基酸、二羧酸和环氧酸。亚油酸乙酯相对GC-MS峰面积的下降可用一级模型描述(R²=0.979–0.996),并得到三种油的表观速率常数。尽管FO和BCO的表观速率常数(2.9×10⁻¹ 天⁻¹)约为GSO(1.46×10⁻¹ 天⁻¹)的两倍,但FO中活跃降解的开始延迟了4天,且二次产物的总体积累仍最低。这些发现比较了共萃取FO与单独油的得率和氧化行为。


Keywords:black cumin (Nigella sativa L.) seeds; grape (Vitis vinifera) seeds; functional oil; supercritical CO2 extraction; oxidative stability; accelerated oxidation

关键词: 黑孜然(Nigella sativa L.)种子;葡萄(Vitis vinifera)种子;功能性油;超临界CO₂萃取;氧化稳定性;加速氧化


2. Methodology方法
2.4. Obtaining grape seed and black cumin oils, as well as functional oil, by combined supercritical CO2 extraction通过联合超临界CO₂萃取获得葡萄籽油、黑孜然油及功能性油
SC-CO2 extraction of the raw materials (GSO, BCO, and FO) was carried out using a laboratory-scale SFE Lab 500 mL unit (SFE Process, France), which is shown in Supplementary materials (Fig. 1S).
To assess the oxidative stability of oils produced under their respective yield-optimized conditions, GSO, BCO, and FO were extracted using the previously established operating settings for each sample. The extractor pressure was 300 bar for all three oils, while the extractor temperature was 60°C for GSO and 50°C for BCO and FO. The CO2 flow rate (30 g/min), extraction time (5 h), separator pressure (50 ± 5 bar), and separator temperature (50 ± 2°C) were kept constant. This design allowed us to characterize the oils obtained under conditions selected for high oil recovery, as relevant to their potential production.

The SC-CO2 extraction conditions were optimized in preliminary experiments (data not shown; a separate manuscript is in preparation). The optimal pressure in the extractor is 300 bar; the temperature for GSO is 60 °C, and for BCO and FO – 50 °C. The ratio of black cumin seeds to grape seeds for producing FO is 1:1.

使用实验室规模SFE Lab 500 mL装置(SFE Process,法国)对原料(GSO、BCO和FO)进行SC-CO₂萃取,装置见补充材料(图1S)。
为评估在各自得率优化条件下制得的油的氧化稳定性,采用先前为各样品建立的操作参数萃取GSO、BCO和FO。三种油的萃取器压力均为300 bar,而萃取器温度分别为:GSO 60°C,BCO和FO 50°C。CO₂流量(30 g/min)、萃取时间(5 h)、分离器压力(50±5 bar)和分离器温度(50±2°C)保持恒定。该设计使我们能够表征在高油回收率条件下获得的油,这与其潜在生产相关。
SC-CO₂萃取条件已在初步实验中优化(数据未显示;另一篇手稿正在准备中)。萃取器最佳压力为300 bar;GSO温度为60°C,BCO和FO为50°C。用于生产FO的黑孜然种子与葡萄籽的比例为1:1。


*本文内容非商业广告,仅供专业人士参考!